伊人久久大香线蕉综合

  • <s id="eowc8"><samp id="eowc8"></samp></s><legend id="eowc8"><table id="eowc8"></table></legend>
  • <rt id="eowc8"><kbd id="eowc8"></kbd></rt>
  • <menu id="eowc8"></menu>
  • 全國服務熱線:

    18396804865 錢經理

    數控等離子切割機改造升級服務

    2019-10-14 16:59:09文章來源:www.dudleysmarina.com546

    大家一起了解新一代的數控等離子切割機改造升級服務:

    Let's learn about the upgrade service of the new generation CNC plasma cutting machine.

    一.遵照當地的電氣規程來擬訂電纜線的尺寸和類型.經常檢查電纜線的外層是否有損壞(裸線危險),當電源線損壞時不要使用設備,如果電源線損壞應立即更換.

    1. Draw up the size and type of cable in accordance with local electrical regulations. Check the outer layer of cable regularly for damage (bare line danger). Do not use equipment when the power line is damaged. If the power line is damaged, replace it immediately.

    二.如果等離子電源裝置的蓋子未裝好,不要使用等離子系統,裸露的電源端子有很大的危險性.

    2. If the cover of the plasma power supply device is not installed, do not use the plasma system. The exposed power supply terminals are very dangerous.

    三.當切割下料時不要去拾工件及廢料.

    3. Don't pick up the workpiece and scrap when cutting.

    四.更換任何電氣部件之前,應先斷開供電電源,等待5分鐘讓電容放電后再進行操作.

    4. Before replacing any electrical components, the power supply should be disconnected and the capacitor should be discharged for 5 minutes before operation.

    五.設備必須可靠接地,機床體、控制箱及等離子電6.保持你的身體及衣服的干燥.當使用設備時不要站在、坐在或躺在潮濕的表面.

    5. Equipment must be grounded reliably. Machine body, control box and plasma electricity 6. Keep your body and clothes dry. Do not stand, sit or lie on wet surfaces when using equipment.

    六.提供相應的絕緣材料以防電擊,如果你必須工作在靠近潮濕的區域要特別當心,戴上絕緣手套,穿上絕緣鞋.

    6. Provide appropriate insulation materials to prevent electric shocks. If you have to work near damp areas, take special care. Wear insulating gloves and insulating shoes.

    七.提供一個裝在墻上的帶有相應保險的空氣開關接至設備,該開關使得操作者在遇到緊急情況時可快速切斷電源.

    7. Provide a wall-mounted air switch with corresponding safety to the device, which enables the operator to switch off power quickly in case of emergency. http://www.dudleysmarina.com


      濟南卓然天成是大型數控火焰切割機廠家,數控等離子切割機廠家,便攜式數控切割機廠家www.dudleysmarina.com,供應河北數控火焰切割機,山西數控等離子切割機,遼寧便攜式數控切割機,吉林數控火焰切割機,黑龍江數控等離子切割機,江蘇數控切割機,浙江數控切割機,安徽數控切割機,福建切割機,江西切割機,山東數控切割機,臺灣切割機,河南切割機,湖北數控切割機,湖南數控切割機,廣東切割機,海南數控切割機,四川數控切割機,貴州數控切割機,云南切割機,陜西切割機,甘肅數控切割機,青海數控切割機,需要的朋友聯系我們15254176866

    電話咨詢
    郵件咨詢
    在線地圖
    QQ客服
    網站地圖 伊人久久大香线蕉综合
  • <s id="eowc8"><samp id="eowc8"></samp></s><legend id="eowc8"><table id="eowc8"></table></legend>
  • <rt id="eowc8"><kbd id="eowc8"></kbd></rt>
  • <menu id="eowc8"></menu>